Specs
Designed for | Road | Gravel | XC | Trail | Light-weight e-bike |
Spoke count | 28, 32 hole |
Max Rotor Size | 203mm |
Spoke Compatibility | J-Bend |
Exploded Diagram
Service Guide
Full step-by-step instructions for servicing this hub.
Service Guide: Rear Hub Quick Service →Freehub Bodies
All of the complete freehub bodies compatible with this hub are shown below. Both the "Road / Gravel" and "Mountain / Adventure" freehub bodies are compatible and interchangeable with this hub - simply select the one best suited to how you're using your Dial hub.
Please note: freehub bodies do NOT include endcaps, as these will depend on the frame type you're using. See the Endcaps section below to check if you'll need a new endcap when swapping freehub body type.
Endcaps
Your Dial rear hub can be changed to fit many different hub widths, axle diameters, and freehub body types because of its modular design. Different endcaps might be required when either changing freehub body type, or when moving your Dial hub from one bike to another.
Dial HG, XD and XDR freehub bodies all use the same endcaps. Click which conversion you are after below.
Microspline and N3W freehub bodies all use the same endcaps. Click which conversion you are after below.
Bearings
Left | Right | |
Hub Shell | 15x28x7mm | 15x28x7mm |
Revo Bearing, 15x28x7mm
Seals
Axle seal, fits Dial Shimano driveside/Non Driveside (ID 18.6mm OD 27.3mm)
Hub shell weather seal, fits all road and mountain Dial hubs
Axles and Parts
Dial axle, Chromoly steel, 148mm (131mm length)
Dial axle, Aluminium, 148mm (131mm length)
Internal freehub body spacer, fits all Dial road and mountain hubs (2mm)
Dial 148 hub shell bearing spacer S30-45.35 (45.35mm length)